Canva home
Help

Use margins, bleed, rulers, and crop marks


Planning to print? Turn on margins, bleed, rulers, and crop marks while you design to help everything print as expected.

Bleed, rulers, and crop marks aren’t available yet in Canva Docs. Changing bleed and crop mark sizes is also not available. These are fixed and are measured based on our print specifications.

We may be unable to check your design for quality control before it goes to print, so make sure you use CMYK colors and proof your designs for print before placing your order.

Design zones

From center to edge:

  • Margin: A layout guide for balanced design.
  • Safe zone: Inside your margins. Keep text and logos here.
  • Danger zone (red zone): Canva’s live print check. Red means an element is close enough to the trim line to get cut, even inside your margins.
  • Trim line: Where your design is cut after printing.
  • Bleed: Just past the trim line. Extend backgrounds here, not text. This area is always cut off.

Keep content away from the edges

Show margins to keep text, logos, and key visuals from being trimmed or looking cramped.

Show margins

  1. Create or open an existing design.
  2. From the top menu, select File, then select
    Rulers and guides.
  3. Select Show margins. A border of broken lines will appear on your design pages.
  4. Edit your design, and keep important elements inside the margin.
  • The Show margins feature may not appear in some document types or older templates. Try switching to a newer Canva format or start with a blank design.
  • Margins are different from the danger zone (red zone) shown during proofing.  
    • Margins are used while designing to guide layout. The danger zone (red zone) appears later, during the print preview, and highlights areas that might be trimmed or misaligned if content is too close to the edge.

Avoid white borders after trimming

Bleed is the area past the edge of your design. It helps prevent white borders when your design is trimmed.

Canva adds 0.125 in (3.175 mm) on all sides for products that are trimmed. It’s added when you print or download, so you don’t need to add it to your design size. For example, an A4 design with bleed will export approximately 222 mm × 309 mm, instead of the standard 216 mm × 303 mm (printable area).

Bleed doesn’t apply to products where ink doesn’t reach the edge, such as envelopes, apparel, and drinkware.

Printing outside Canva? Check your print provider’s requirements, since they may trim differently.

Show bleed

Avoid unintended white edges when printing to the edge of the paper.

  1. Create or open an existing design.
  2. From the top menu, select File, then
    Rulers and guides.
  3. Select Show print bleed. A border of dashed lines will appear close to the edges of your design. This bleed margin is fixed based on print production standards and cannot be adjusted.
  4. If you see white gaps around the design edges, resize or stretch your background to cover them. Stretch elements, that you don’t mind being cut, around the edges as well.

If your design doesn’t appear to change, this is normal. Canva slightly reduces the visible content to account for the bleed. You may not see a colored bleed area unless your background or elements extend past the edge.

My print has white edges or got cut off

Check that:

  • Show print bleed and Show danger zone detection are on.
  • Backgrounds reach the dashed bleed border, not just the page edge.
  • Text and logos are inside the margins and out of the red zone.

Line up elements with rulers

You can only use rulers on a computer.

Use rulers

This feature is currently not available when using mobile.

  1. Create or open an existing design.
  2. From the menu bar, select File, then
    Rulers and guides.
  3. Select Show rulers and guides.

To add guides, click and drag your rulers to your design. See Adding, locking and unlocking, and removing guides for more details.

Add crop marks

Crop marks show where to trim. They only appear in exported PDFs, not in the editor, and their size is fixed.

  1. Add bleed to your design (see the previous section).
  2. On the menu bar, select
    Share.
  3. Select
    Download.
  4. On the File type dropdown, select
    PDF.
  5. Under Presets, select Print.
  6. Select Advanced Settings, then turn on Crop marks and bleed (off by default).
  7. Select Download or Pay and Download.

Catch layout issues before you print

The Contextual Danger Zone shows a red highlight when text or elements are too close to the edge. The full danger zone appears, not just around one element. You can snap elements to the edge to keep them in the safe area.

Turn the danger zone warning on or off

  1. Select File.
  2. Select
    Rulers and guides.
  3. Tick Show danger zone detection to turn it on, and untick it to turn it off.

Was this helpful?

Helpful

Unhelpful

People also viewed